Products
Industries
Resources
Service & Support
Company
Contact Us
Account

Products Industries Resources Service & Support Company Contact Us

Account

Request Quote

XPert Nano Enclosures

Products
/
Glove Boxes, Isolators & Powder Containment
/
XPert Systems & Workstations
/
XPert Nano Enclosures

Master product

XPert Nano Enclosures

Resources

Request a Quote

XPert Nano Enclosures provide user protection by keeping hazardous powders and particulates contained during procedures such as nanoparticle manipulation and dry powder chemical handling. Room air is pulled into the enclosure through the front, flows to the baffle and finally passes through a 99.999% ULPA exhaust filter before returning to the laboratory or cleanroom. Stainless steel interior sides, removable baffle, removable air foil and integral work surface are easy to wipe down and keep clean.

The first enclosures ever to be validated for nanomaterial containment as tested by NanoSafe, Inc.™:

Labconco Protector Stainless Steel ULPA Filtered Glove Box (See product details)
Labconco XPert Nano (Product details below)

Features

Deep interior easily accommodates large apparatus including analytical balances
Patented Clean-Sweep air foil
Upper dilution air supply
Upper containment sash foil
Patented, zone-perforated rear baffle
Side-entry air foils
Exhaust ULPA filter, 99.99% efficient on particles 0.12 micron in size
Top-accessible ULPA filter for leak scanning of entire surface
True bag-in/bag-out filter disposal system
Guardian Airflow Monitor
Type 304 stainless steel interior sides, baffle, air foil and integral work surface
Glacier white and gray, dry powder epoxy-coated aluminum and steel exterior
1/4″ thick tempered safety glass front sash
Intrinsically safe, negative pressure plenum design
Pressure gauge to monitor filter loading
Pre-wired fluorescent lamp and switches for blower and light
Two utility ports for pass-through of electrical cords
Particulate containment independently verified by NANOSAFE, INC.

Required Accessories

Base Cabinets
Adjustable Height Base Stands

Optional Accessories

Ductwork
Canopy Connections
General Accessories

CA Prop 65 Warning ➔

Select all options to find a Catalog #

Built-in Ionizer

Yes

Plug Type

100/115 volts, 50/60 Hz

230 volts, 50/60 Hz

100 volts, 50/60 Hz

115 volts, 50/60 Hz

Shipping Width

Request a Quote

Talk to an Expert

Application Specialists

Jon Buzard

Product Service

Louis Drining

Sales contacts Project assistance

Looking for some other kind of information? Contact us ➔

Related products

Telescoping Base Stands with Casters

Telescoping Base Stands with Casters may be adjusted to eight height positions prior to installation. Telescoping legs are adjustable in 1" increments from 27.5" to 34.5". Casters provide mobility...

View Product

Telescoping Base Stands with Fixed Feet

Telescoping Base Stands with Fixed Feet may be adjusted to eight height positions prior to installation. Telescoping legs are adjustable in 1" increments from 27.5" to 34.5". Durable 1.75" tubular,...

View Product

Standard Storage Cabinets

Protector Standard Storage Cabinets support Labconco fume hoods and may be used for storage and venting of small laboratory instruments and mild acids and other reagents.

View Product

Hydraulic Lift Base Stands

Labconco offers a variety of hydraulic lift base stands for use with our enclosures. The hydraulic lift offers the flexibility to adjust the work surface height as needed to provide a more ergonomic...

View Product

Electric Hydraulic Lift Base Stands, 230 volts, 50 Hz

Electric Hydraulic Lift Base Stands offer the flexibility to be adjusted at any time. Height is infinitely adjustable from 25.5" to 33.5". They allow you to position the stand and the enclosure is...

View Product

Manual Hydraulic Lift Base Stands

Manual Hydraulic Lift Base Stands have infinite height adjustment from 25.5" to 33.5". Height may be adjusted at any time to accommodate person of different heights and wheelchair-bound users.

View Product

Replacement Filters and Prefilters

Used with carbon-based and HEPA filters in a variety of Labconco enclosures which require periodic replacement. Select the right filters to fit your Labconco product.

View Product

Balance Vibration Isolator

Isolator minimizes vibration to sensitive balances. Includes a 13.4" w x 20.4" d x 2.7" thick marble slab, four isolator pads, and a type 304 stainless steel protective top cover. Included with XPert...

View Product

Canopy Connections for Purifier Class I and HEPA Filtered Enclosures and XPert Balance Systems

Allow the enclosure to be thimble-ducted to the outside for additional protection. The canopy's air gap provides a means of balancing air by allowing room air to enter the ductwork and mix with the...

View Product

Remote Blower for XPert Balance Enclosure, Protector XVS Ventilation Station or Purifier HEPA Filtered Enclosure

This Remote Blower is for connection to XPert Balance Enclosure, Protector XVS Ventilation Station, Purifier HEPA Filtered Enclosure, Protector Work Station or Protector Demonstration Hood. The...

View Product

Belt-Driven Coated Steel Blowers

Labconco Coated Steel Blowers have been specifically designed to meet the demanding day-to-day ventilation requirements for a wide range of hood choices. Durable and easy to maintain, Coated Steel...

View Product