Features

• One-piece molded, medium-density polyethylene shell. Labconco recommends this website for a comprehensive listing of chemical resistance data for polyethylene.
• Dry powder epoxy-coated steel superstructure
• 1/4" thick laminated safety glass viewing window, 26.4" wide x 12.5" high, removable for loading equipment, with powder-coated steel frame and neoprene gasket
• Space-saving inner and outer transfer chamber doors that pivot upward, are counterbalanced and equipped with quick-latches
• Black, chemical-resistant work surface sealed to the glove box floor
• Pressure relief valve that activates at pressure/vacuum above 6 inches or below -6 inches of water gauge.
• Pressure relief valve vent, 4" nominal diameter
• Interior ceiling-mounted electrical duplex receptacle with 5 amp maximum circuit load
• Neoprene gloves, size 9 3/4, are included.
• Fluorescent lamp, 22 watts, with easy replacement from the top
• Switches for light and innermost interior electrical receptacle
• Approximately 13 cubic feet of interior space in main chamber
• 11.0" nominal ID x 12.0" long transfer chamber
• Factory leak tested with a mass spectrometer while glove box is pressurized with helium at 5 inches of water gauge.
• No detectable leaks greater than 1 x 10(-4) ml/sec
• Meet Class 1 atmosphere containment conditions for oxygen leak rates per ISO 10648-2 test method
• Six manual valves for purging and filling of both main chamber and transfer chamber and for drying train connections
• Main chamber pressure gauge with readings from -5 to +5 inches of water gauge
• Transfer chamber pressure gauge with readings from 0 to -29 inches of mercury
• Transfer chamber high vacuum sleeve and interior interlocking shelf of dry powder epoxy-coated steel
• ETL listed (115 volt models)
• CE Conformity (230 volt models)

Options

• International electrical configurations

Required Accessories

• Rotary Vane Direct Drive Vacuum Pumps
• Adjustable Height Base Stands
• Base Cabinet
• Work Surface
• Inert gas for filling

Optional Accessories

• Acrylic Viewing Window
• Automatic Pressure Controller
• Diaphragm Pumps
• Electrical Power Strips
• Exterior Transfer Chamber Shelf
• External Glove Port Covers
• Gas Fill/Vacuum Purge Tubing Kits
• Gloves and Glove Box Accessories
• Hanging Shelf Accessories
• Hygrometers
• Oxygen and Moisture Removal Column
• Oxygen Monitors
• Pressure Relief Valve Vent Kits
• Remote Blowers
• Storage Shelf Kits
• Trap Inserts