Features (All Models)

Electronically Commutated Motor (ECM)
Constant Airflow Profile (CAP) airflow monitoring system
Intrinsically-safe negative pressure design
Air-Wave™ Entry System
Contain-Air™ Negative Pressure Channel
Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available
Interior-mounted, line-of-sight color LCD with MyLogic OS. Displays filter life, status messages for alarm conditions and alerts. 8 languages available
Bright, 90-150 footcandle, glare-free LED lighting located outside the contaminated work area
Fully-closing, clear 1/4" tempered safety glass sash
Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots
Two electrical duplex receptacles. Flush-mounted-stainless steel with dampened hinges. Single outlets on 230V models. One outlet on each side, with ground fault interruption (115V)
Smart-Start™ System user-programmable start up & shut down
Night-Smart™ System reduces blower speed when sash is closed
Leak-tight stainless steel interior & powder-coated steel exterior
Removable towel catch located under work surface
Code-activated electronic security lock
22.6" (57 cm) max. sash opening & 27.0" (69 cm) viewing height
10° Angled sash with counterbalanced, easy lift mechanism
ADA-Compliant touchpad control on right side post
Noise level <63 dBA
Heat load 990 BTU/hour (4' models)
Removable, seamless type 304 stainless steel, dished work surface with lift out knobs
Nominal inflow velocity of 105 fpm (0.5 m/sec)
Nominal downflow velocity of 55 fpm (0.3 m/sec)
Approximately 70% air recirculation
Overall depth x height: 31.2" x 61.7" (79.2 x 156.7 cm)
10' (3 m) power cord with plug
Built-in timer and digital clock
Five year warranty

Required Accessories (Not Included)

Supporting base if non-welded stand option is not selected

Options

3', 4', 5', and 6' widths
International electrical configurations
Non-welded, NSF-Approved, powder-coated steel telescoping base stand with fixed feet
Accessory Package: 254 nm UV lamp, ADA-compliant service fixture(s) with ball-type valve(s), and NSF-Approved Vacu-Pass™ Cord & Cable Portal
Ventus Canopy Connection

Compliance

ETL listed
NSF International listed
ADA-compliant (height of controls and receptacles)
CE Conformity marking (230V models)
ISO 5 conditions per ISO 14644-1 and 2

Master product

Distillation Grid Kits

Talk to an Expert

Resources

Our Offerings

Resources

Service & Support

Company